Download Free Testking Data Center Switching Network Infrastructure 642-964 Dumps

Testking Data Center Switching Network Infrastructure 642-964

Cisco Data Center Networking Infrastructure Support

Exam Number: 642-964
Associated Certifications: Data Center Switching Network Infrastructure
Duration: 75 minutes (65 questions)
Available Languages: English
Click Here to Register: Pearson VUE
Exam Policies: Read current policies and requirements
Exam Tutorial: Review type of exam questions
Question: 1
What will be upgraded as a result of this command?

upgrade ftp://ftpuser@10.1.2.3//upgrade/IPS-K9-r-1.1-a-5.1-1.pkg

A – recovery partition
B – application partition
C – both application and recovery partitions immediately
D – both application and recovery partitions at the next scheduled automatic IDSM update
Answer: A Question: 2
On a Cisco Catalyst 6500 Series Switch, how many physical links can be aggregated into an
EtherChannel group?

A – 4
B – 8
C – 16
D – 32
Answer: B Question: 3
How would you configure a NAM to monitor and report the most heavily viewed sections of a website?

A – Create a separate domain name or virtual server IP address for each section of the site. Add each domain name or IP address to the NAM application protocol directory.
B – Enable regular-expression pattern matching. Define application protocol filters based on regular expressions that match the desired URLs.
C – Enable URL monitoring. Define each desired URL as an application in the protocol directory.
D – Use SPAN or VACLs to capture upper-layer protocol data from the web servers. Use a third- party application to parse the stored capture files.
Answer: C Question: 4
How can you configure the NAM to view a list of all switches that are sending NDE packets?

A – Enter the command sh data-source nde.
B – Configure Cisco Discovery Protocol to detect all switches on the network.
C – Launch NetFlow Listening Mode from the Cisco Traffic Analyzer application.
D – The NAM will automatically detect NDE broadcasts and add each switch to the NetFlow device table.
Answer: C Question: 5
Refer to the exhibit.

Exam Name: Cisco Data Center Networking Infrastructure Solutions Support
Exam Type: Cisco
Exam Code: 642-964 Total Questions: 60

Which FWSM command allows routing of TCP traffic from the Internet to network 100.3.0/24?

A – access-list inside permit tcp 192.16.1.0 255.255.255.0 10.0.3.0 255.255.255.0
B – route inside 10.0.3.0 255.255.255.0 10.0.1.3
C – route outside 10.0.3.0 255.255.255.0 10.0.1.3
D – route inside 0 0 10.0.1.3
Answer: B Question: 6
Which command must be issued to activate the FWSM firewall context?

A – allocate-vlan
B – config-url
C – limit-resource
D – map-interface
Answer: B Question: 7
The IDSM management-interface IP address can be configured from which prompt?

A – IDSM(config)#
B – IDSM(config-hos-net)# C – IDSM(config-mgmt)#
D – IDSM(config-if)#
Answer: B Question: 8
Refer to the exhibit.

Exam Name: Cisco Data Center Networking Infrastructure Solutions Support
Exam Type: Cisco
Exam Code: 642-964 Total Questions: 60

Which command would you use on the FWSM to provide a default route from Servers 1 and 2 to
the Internet?

A – route inside 00 192.168.100.1
B – route inside 10.1.0.0 255.255.0.0 192168.1.1
C – route outside 0 0 192.168.100.1
D – route outside 10.1 .0.0 255.255.0.0 192.168.1.1
Answer: C Question: 9
Which statement is correct regarding Layer 3 EtherChannels?

A – They are STP-aware.
B – They cannot be automatically negotiated.
C – Multiple EtherChannels are used between a pair of switches.
D – Multiple EtherChannels between two switches create an STP loop.
Answer: C Question: 10
What is the effect of executing the command intrusion-detection module 5 management-port access-vlan 10 on an IDSM?

A – allows the IDSM to be managed by devices in VLAN 10
B – configures the IDSM to monitor traffic from VLAN 10 in in-line mode
C – allows the IDSM to perform blocking actions on devices in VLAN 10
D – configures the IDSM to monitor traffic from VLAN 10 in promiscuous mode

Answer: A Question: 11

Exam Name: Cisco Data Center Networking Infrastructure Solutions Support
Exam Type: Cisco
Exam Code: 642-964 Total Questions: 60

Which three statements are requirements for configuring a web browser to work with the NAM
Cisco Traffic Analyzer? (Choose three.)

A – Enable Java and JavaScript.
B – Set the browser cache to at least 500 MB.
C – Configure the browser to accept all cookies. D – Install the Cisco Traffic Analyzer application.
E – Set the browser cache to clear itself automatically when the user exits the browser.
F – Configure the browser to check for newer versions of pages every time it loads a page.
Answer: A, C, E Question: 12
Which step will configure high availability on two IDSMs in in-line mode?

A – Configure an EtherChannel between the two IDSMs. B – Enable hardware bypass on the primary IDSM.
C – Enable software bypass on the backup IDSM. D – Install the IDSMs in separate chassis.
Answer: C Question: 13
Your customer uses these file-oriented network applications:

FTP
Web-based file repositories
Windows and Linux file sharing

How can you use the NAM to create a report showing total network traffic for these applications?

A – Define a VACL that forwards traffic for all of the applications.
B – Define an application group that contains all of the interfaces for the application servers.
C – This cannot be accomplished because the NAM cannot monitor upper-layer protocol data.
D – Add each application to the Cisco Traffic Analyzer protocol directory and create an application group with all of the applications.
Answer: D Question: 14
Refer to the exhibit.

Given this network design, what can you use to configure the IDSM to capture traffic?
Interactive Testing Engine Included!
60 Questions
Updated : 03/13/2008
Price : $87.99 $79.99
Free download?Data Center Switching Network Infrastructure 642-964
Free download?Data Center Switching Network Infrastructure 642-964