Pass4sure Cisco CCSP Exam 642-502 v2.93

PassGuide Cisco dumps

Securing Networks with Cisco Routers and Switches Exam(SNRS) : 642-502 Exam

Exam Number/Code: 642-502
Exam Name: Securing Networks with Cisco Routers and Switches Exam(SNRS)
VUE Code: 642-502
Questions Type: Single choice, Multiple choice, Simulate,
Question Numbers of Real-exam: 60-70 questions

Exam : Cisco 642­502

Title :

Securing Networks with Cisco

Routers and Switches

Exam(SNRS)

Update : Demo

1.What are the two functions that crypto ACLs perform on outbound traffic? Choose two.
A.bypasses outbound traffic that should be protected by IPSec B.selects inbound traffic that should be protected by IPSec C.selects outbound traffic that should be protected by IPSec
D.sends outbound traffic that should not be protected by IPSec as clear text
E.discards outbound traffic that should not be protected by IPSec F.discards outbound traffic that requires protection by IPSec Correct:C D
2.Refer to the exhibit. An administrator cannot telnet to the router. The administrator is not prompted for a username or password and cannot ping the router. After reviewing the output of a show running­config command, what do you determine?

A.AAA is not enabled.
B.Everything is configured correctly (the problem must be caused by something else). C.An access control list is blocking traffic.
D.The wrong passwords are being used. E.The TACACS server must be unreachable.
F.The wrong authentication method is applied to lines.
Correct:B
3.Which three thresholds does CBAC on the Cisco IOS Firewall provide against DoS attacks? Choose three.
A.number of half­open sessions based upon time B.total number of half­open TCP or UDP sessions C.number of fully open sessions based upon time D.number of half­open TCP­only sessions per host

E.total number of fully open TCP or UDP sessions
F.number of fully open TCP­only sessions per host
Correct:A B D
4.Refer to the LAN Wizard screen in the exhibit. How many bits would you input to configure this host for a subnet consisting of two hosts on subnet 172.26.26.0?

A.3
B.4
C.24
D.30
E.128
F.255
Correct:D
5.Refer to the Cisco Router and Security Device Manager page in the exhibit. What would be the result of clicking the “Launch the selected task” button in the VPN configuration screen?

A.to start the GRE site­to­site VPN connection configuration
B.to edit the site­to­site VPN connection
C.to start the security audit
D.to start the Easy VPN Server configuration
E.to start the default site­to­site VPN connection configuration

F.to start the Easy VPN Remote configuration
Correct:E
6.Where are access profiles stored with the authentication proxy features of the Cisco IOS Firewall?
A.PIX Firewall
B.Cisco router
C.Cisco VPN Concentrator
D.Cisco Secure ACS authentication server
Correct:D
7.Choose the correct command to allow IKE to establish the IPSec security associations.
A.crypto map 10 isakmp
B.crypto map 10 manual
C.crypto map MYMAP ipsec­isakmp D.crypto map MYMAP ipsec­manual E.crypto map MYMAP 10 ipsec­isakmp F.crypto map MYMAP 10 ipsec­manual Correct:E
8.Choose the correct command to generate two RSA key pairs for use with certificate authority.
A.key generate rsa general­keys
B.key generate rsa usage­keys
C.crypto key generate rsa general­keys
D.crypto key generate rsa usage­keys
E.enable crypto key generate rsa general­keys F.enable crypto key generate rsa usage­keys Correct:D
9.Which command is required to specify the authorization protocol for authentication proxy?
A.auth­proxy group tacacs+
B.aaa auth­proxy default group tacacs+ C.authorization auth­proxy default group tacacs+
D.aaa authorization auth­proxy default group tacacs+ E.aaa authorization auth­proxy group tacacs+
F.aaa authorization auth­proxy default group
Correct:D
10.Which Cisco Catalyst IOS command can be used to mitigate a CAM table overflow attack?
A.switch(config­if)# port­security maximum 1
B.switch(config)# switchport port­security
C.switch(config­if)# port­security
D.switch(config­if)# switchport port­security maximum 1
E.switch(config­if)# switchport access
F.switch(config­if)# access maximum 1
Correct:D
11.An authentication attempt to a Cisco Secure ACS for Windows server failed, yet no log entries are in the reports. What are two possible causes of this problem? (Choose two.)

A.user is not defined
B.user belongs to the wrong group
C.CSAUTH service is down on the Cisco Secure ACS server
D.password has expired
E.user entered an incorrect password
F.communication path between the NAS and Cisco Secure ACS server is down
Correct:C F
12.What are three main components of the Cisco IOS Firewall feature set? (Choose three.)
A.Context­based Access Control
B.port security
C.authentication proxy
D.authentication, authorization, and accounting
E.Intrusion Prevention System F.neighbor router authentication Correct:A C E
13.The SDF uses which type of file format, with a definition of each signature along with relevant configurable actions?
A.ASCII B.HTML C.JPEG D.Word E.text F.XML Correct:F
14.Which two are typical Layer 2 attacks? (Choose two.)
A.MAC spoofing B.CAM table overflow C.route poisoning D.DHCP Starvation E.ARP Starvation F.spam
Correct:A B
15.What kind of signatures trigger on a single packet? (Choose one.)
A.regenerative B.cyclical C.atomic D.dynamic E.compound Correct:C
16.What does authentication proxy on the Cisco IOS Firewall do?
A.creates specific authorization policies for each user with Cisco Secure ACS, dynamic, per­user security and authorization
B.provides additional visibility at intranet, extranet, and Internet perimeters

C.creates specific security policies for each user with Cisco Secure ACS, dynamic, per­user
authentication and authorization
D.provides secure, per­application access control across network perimeters
Correct:C
17.Select the two protocols used to provide secure communications between SDM and the target router. (Choose two.)
A.HTTPS B.RCP C.Telnet D.SSH E.HTTP F.AES Correct:A D
18.Which one of the following actions is used to send SDM generated commands to the target router?
A.Refresh B.Save C.Deliver D.Download E.Copy­config Correct:C
19.Select the maximum number of routers SDM can manage simultaneously?
A.1
B.5
C.50
D.100
E.1000
F.determined by router model
Correct:A
20.Drag Drop question

Correct:
Green choice2­­­­>Yellow Choice1
Green choice4­­­­>Yellow Choice2
Green choice6­­­­>Yellow Choice3
Green choice8­­­­>Yellow Choice4
Green choice9­­­­>Yellow Choice5
21.The Cisco Identity­Based Networking Services (IBNS) solution is based on which two standard implementations? (Choose two.)
A.TACACS+ B.RADIUS C.802.11
D.802.1x E.802.1q F.IPSec Correct:B D
22.Which module is audited first when packets enter an IOS Firewall IDS and match a specific audit rule?
A.TCP B.ICMP C.IP
D.application level
E.UDP
Correct:C
23.How does the user trigger the authentication proxy after the idle timer expires?
A.authenticates the user

B.initiates another HTTP session
C.enters a new username and password D.enters a valid username and password Correct:B
24.Refer to the exhibit. Given the output of the show crypto ipsec sa command, which encryption algorithm is being used?

A.PCP
B.ESP C.DES D.3DES

|

E.AH
F.HMAC
Correct:C
25.Which Cisco Catalyst IOS command is used to mitigate a MAC spoofing attack?
A.switch(config­if)# port­security mac­address 0000.ffff.aaaa B.switch(config)# switchport port­security mac­address 0000.ffff.aaaa C.switch(config­if)# switchport port­security mac­address 0000.ffff.aaaa D.switch(config)# port­security mac­address 0000.ffff.aaaa E.switch(config­if)# mac­address 0000.ffff.aaaa
F.switch(config)# security mac­address 0000.ffff.aaaa
Correct:C
26.Which three keywords are used with the dot1x port­control command? (Choose three.)
A.enable B.force­authorized C.force­unauthorized D.authorized E.unauthorized
F.auto
Correct:B C F
27.Refer to the exhibit. After reviewing the running­config file, what do you determine?

A.No one will be able to log in.
B.No one will be able to console in.
C.The wrong authentication method is applied to lines.

D.Users will use the local database to log in to console.
E.Users will use the password cisco to log in to console. F.Users will use the local database to log in to vty. Correct:D
28.Which one of the following actions is used to prevent newly configured SDM commands from being sent to a target router?
A.Delete B.Remove C.Undo
D.Clear­commands E.Refresh Correct:E
29.Choose the correct command that will load the SDF into a router and merge the new signatures with those that are already loaded in the router.
A.copy flash ips­sdf B.copy url ips­sdf C.copy ips­sdf url D.write flash ips­sdf E.write ips­sdf url F.write url ips­sdf Correct:B
30.Choose the correct command to disable signature 1000 in the SDF file.
A.1000 disable
B.no ip ips signature 1000
C.no ip ips signature 1000 enable D.ip ips signature 1000 disable E.ip signature 1000 disable F.signature 1000 disable Correct:D

“Securing Networks with Cisco Routers and Switches Exam(SNRS)”, also known as 642-502 exam, is a Cisco certification.
Preparing for the 642-502 exam? Searching 642-502 Test Questions, 642-502 Practice Exam, 642-502 Dumps?

With the complete collection of questions and answers, Pass4sure has assembled to take you through 63 Q&A we offer correct answe to your 642-502 Exam preparation. In the 642-502 exam resources, you will cover every field and category in CCSP helping to ready you for your successful Cisco Certification.
Questions and Answers : 63 Q&A we offer correct answe
Updated: May 4th , 2008
Market Price: $129.99
Member Price: $89.99

The Securing Networks with Cisco Routers and Switches exam is one of the exams associated with the Cisco Certified Security Professional certification. Candidates can prepare for this exam by taking the SNRS v1.0 course. This exam includes simulations and tests a candidate’s knowledge and ability to secure networks using Cisco routers and switches.
Free Down:Pass4sure Cisco CCSP Exam 642-502 v2.93
Free down:Testking ccsp 642-502 Exam
password:www.ciscoexams.org

Bookmark and Share
PassGuide Cisco Braindumps-Buy Best Cisco Practice Exam,high-quality and low-price ,100% Guarantee to Pass , contact ,Mail:Sales@passguide.com
Cisco Braindumps Free Downloads

Type

Exam Bible New Questions & Answers

Latest Updated

Download link
Testking torrent All Cisco 's Exam Pack

589

1 days ago Download

PassGuide Cisco Practice Test Questions

certbible

4 Responses to “Pass4sure Cisco CCSP Exam 642-502 v2.93”

  1. [...] Pass4sure 642-502 Securing Networks with Cisco Routers and Switches Exam(SNRS) Pass4sure 642-522 Securing Networks with PIX and ASA Exam(SNPA) Pass4sure 642-532 Securing Networks Using Intrusion Prevention Systems Exam (IPS) Pass4sure 642-513 Securing Hosts Using Cisco Security Agent Exam (HIPS) Pass4sure 642-551 Securing Cisco Network Devices Exam(SND) Pass4sure 642-521 Cisco Secure PIX Firewall Advanced Pass4sure 642-542 Cisco SAFE Implementation Exam Pass4sure 642-552 Securing Cisco Networking Devices (SND) Pass4sure 642-503 Securing Networks with Cisco Routers and Switches Pass4sure 642-523 Securing Networks with PIX and ASA Pass4sure 642-533 Implementing Cisco Intrusion Prevention System (IPS) TestKing Pass4sure Related Posts Pass4sure Cisco CCSP Exam 642-533 v2.93Pass4sure Cisco CCSP Exam 642-523 v2.93Pass4sure Cisco CCSP Exam 642-503 v2.83Pass4sure Cisco CCSP Exam 642-552 v2.93Pass4sure Cisco CCSP Exam 642-542 v2.93Pass4sureCisco CCSP Exam 642-513 v2.93Pass4sure Cisco CCSP Exam 642-533 v2.73Pass4sure Cisco CCSP 642-522 EXAM v2.83Pass4sure Cisco CCSP Exam 642-502 v2.93CCSP SND Quick Reference (Digital Short Cut) TestKing [...]

  2. [...] Pass4sure 642-502 Securing Networks with Cisco Routers and Switches Exam(SNRS) Pass4sure 642-522 Securing Networks with PIX and ASA Exam(SNPA) Pass4sure 642-532 Securing Networks Using Intrusion Prevention Systems Exam (IPS) Pass4sure 642-513 Securing Hosts Using Cisco Security Agent Exam (HIPS) Pass4sure 642-551 Securing Cisco Network Devices Exam(SND) Pass4sure 642-521 Cisco Secure PIX Firewall Advanced Pass4sure 642-542 Cisco SAFE Implementation Exam Pass4sure 642-552 Securing Cisco Networking Devices (SND) Pass4sure 642-503 Securing Networks with Cisco Routers and Switches Pass4sure 642-523 Securing Networks with PIX and ASA Pass4sure 642-533 Implementing Cisco Intrusion Prevention System (IPS) [...]

  3. [...] Pass4sure 642-502 Securing Networks with Cisco Routers and Switches Exam(SNRS) Pass4sure 642-522 Securing Networks with PIX and ASA Exam(SNPA) Pass4sure 642-532 Securing Networks Using Intrusion Prevention Systems Exam (IPS) Pass4sure 642-513 Securing Hosts Using Cisco Security Agent Exam (HIPS) Pass4sure 642-551 Securing Cisco Network Devices Exam(SND) Pass4sure 642-521 Cisco Secure PIX Firewall Advanced Pass4sure 642-542 Cisco SAFE Implementation Exam Pass4sure 642-552 Securing Cisco Networking Devices (SND) Pass4sure 642-503 Securing Networks with Cisco Routers and Switches Pass4sure 642-523 Securing Networks with PIX and ASA Pass4sure 642-533 Implementing Cisco Intrusion Prevention System (IPS) [...]

  4. [...] Pass4sure 642-502 Securing Networks with Cisco Routers and Switches Exam(SNRS) Pass4sure 642-522 Securing Networks with PIX and ASA Exam(SNPA) Pass4sure 642-532 Securing Networks Using Intrusion Prevention Systems Exam (IPS) Pass4sure 642-513 Securing Hosts Using Cisco Security Agent Exam (HIPS) Pass4sure 642-551 Securing Cisco Network Devices Exam(SND) Pass4sure 642-521 Cisco Secure PIX Firewall Advanced Pass4sure 642-542 Cisco SAFE Implementation Exam Pass4sure 642-552 Securing Cisco Networking Devices (SND) Pass4sure 642-503 Securing Networks with Cisco Routers and Switches Pass4sure 642-523 Securing Networks with PIX and ASA Pass4sure 642-533 Implementing Cisco Intrusion Prevention System (IPS [...]

Leave a Reply