Cisco:642-446 pass4sure QA-update
Recently, Cisco’s Research Group released a new test plan for Cisco certification voice experts (CCVP). The original CCVP was divided into two directions, CCVP: Cisco Unified CallManager and CCVP: Cisco Unified Communications Manager. Candidates can choose either of them according to their own situation.
Both of these two CCVP certification directions require candidates to participate in five examinations, three of which are compulsory subjects for both directions. One of them is CVOICE exam, the latest exam code released is (642-436), which is released with CCVP: Cisco Unified CallManager certification. Candidates who have already passed CCVP certification can choose to participate in the July testing of old versions of CVOICE (642-432) exam, and then obtain update. Another two examinations are Cisco Quality of Service (QoS) 2.2 examination, with exam code (642-642) and Cisco Troubleshooting examination, with exam code (642-426).
Now Cisco Unified CallManager direction examination’s uniqueness is the Cisco gateway exams (642-453) and the new or old version of Cisco IP phone examination, with respective exam codes (642-444) and (642-445).
Cisco Unified Communications Manager direction examination requires three compulsory subjects plus two new examinations. The two new examinations are as follows: IP phone 6.0 1 (642-446) and 2 (642-456).
In addition, in view of all the new examinations, all Cisco laboratory-based simulation trainings are available.
“Worldwide there are more than 50000 people and more than 70% of the world’s top 500 enterprises to use Cisco Unified Communications certificate, which requires that people with high level of IP phone constantly improve their own skills.” Cisco general manager LeJeanne Beliveau-Dunn commented in a statement: “CCVP provides opportunities for those who want to display their own potential and promote career development in the field of IP phone.”
To obtain CCVP certificate, the following conditions are required:
1. Must have CCNA Certificate
2. Must pass CCVP examinations
There are two ways to pass CCVP examinations:
2.1.For individuals using Cisco Unified Communications Manager the following path towards certification is recommended:
< ![endif]–><!–[if !vml]–><!–[endif]–>
2.2. For individuals using Cisco Unified CallManager the following path towards certification is recommended:
< ![endif]–><!–[if !vml]–><!–[endif]–>
(642-446) is Cisco Implementing Cisco Unified Communication Manager certification examination. In the beginning of April, 642-446 Q & A in the VUE test centre has been updated recently. Pass4sure too has made synchronous updates.
For detailed information about the subjects, please refer to:
http://www.pass4sure.com/642-446.html
The following are some basic information about the examination:
Exam Number: 642-446
Associated Certifications: CCVP
Duration: 75 minutes (Another 30 minutes are available for non-English countries.)
Available Languages: English
Q&A number: (60 - 70 questions)
642-446 is a compulsory exam for CISCO CCVP certificate. Pass4sure has recently updated 642-446 to make sure that its exam coverage being at least 95% so that candidates can pass the exam with our help.
Exam Description
The 642-446 CIPT1 Implementing Cisco Unified Communications IP Telephony Part 1 is the exam associated with the CCVP certification. This exam tests a candidate’s knowledge of deploying a Cisco Unified Communications Manager to support single site and centralized call processing models. Candidates can prepare for this exam by taking the CIPT1 Implementing Cisco Unified Communications Manager Part 1 course.
Exam Topics
The following topics are general guidelines for the content likely to be included on the Remote Access exam. However, other related topics may also appear on any specific delivery of the exam. In order to better reflect the contents of the exam and for clarity purposes, the guidelines below may change at any time without notice.
Perform an installation and initial set up of a Cisco Unified Communications Manager cluster
Describe administrative access to Cisco Unified Communications Manager
Describe Cisco Unified Communications Manager cluster architecture
Describe Cisco Unified Communications Manager redundancy designs
Describe the requirements for Cisco Unified Communications Manager use of DHCP, TFTP, DNS, and NTP
Determine the services necessary to support a Cisco Unified Communications Manager deployment and activate the appropriate services
Perform an install and upgrade on Cisco Unified Communications Manager
Describe and configure Cisco Unified Communications Manager to support on-cluster calling
Configure a Cisco Unified Communications Manager group
Configure users, user groups, and roles
Configure Cisco Unified Communications Manager to support Cisco SCCP & SIP Phones
Configure Cisco Unified Communications Manager to support 3rd party SIP phones
Describe how to harden an IP phone
Configure LDAP integration
Configure Cisco Unified Communications Manager profiles and device pools
Configure Cisco Unified Communications Manager templates
Configure a Cisco switch to support IP phones
Use Cisco Unified Communications Manager BAT to manage phones and users
Describe the function of TAPS
Describe and configure a route plan for Cisco Unified Communications Manager to support off-net calling
Describe Cisco Unified Communications Manager digit analysis
Implement an MGCP Gateway
Configure route patterns and route filters
Configure route lists and route groups
Implement toll-fraud prevention
Configure digit manipulation
Describe the functions and usage of CSS and partitions
Implement calling privileges
Implement call coverage
Describe and configure Cisco Unified Communications Manager media resources
Describe media resources
Configure MeetMe conferencing, hardware conferencing resources, and software conferencing resources
Configure MoH
Configure MRGs and MRGLs
Configure the Cisco Unified Communications Manager to support features and applications
Configure IP phone services
Enable user web page access
Integrate Cisco Unified Communications Manager with Unity and UnityConnection
Configure Call Park, Privacy, Barge, Call Pickup, and Intercom
Implement Presence
The following are part of 642-446 Q&A from pass4sure. You can go to pass4sure and consult live-support for more information if you are interested in its products. Now let’s look at the following study-guides offered by pass4sure.
(This is only a journal, which will not include the exam. Please download the PDF file if you need.)
11 Which three steps are necessary in order to configure DHCP for phone support using the GUI in Cisco Unified Communications Manager 6.0? (Choose three.)
Type: 2
Options:
A. add the DHCP server IP address to the device pool
B. activate DHCP Monitor Service
C. add and configure the DHCP server
D. start the application on an external server
E. configure the DHCP subnet
F. download the DHCP server application from the plug-in page
Answer: BCE
12 Which two of these are characteristics of multicast music on hold? (Choose two.)
Type: 2
Options:
A. point-to-multipoint, two-way audio stream
B. separate audio stream for each connection
C. multiple audio streams that require multiple multicast IP addresses
D. support for all codecs that are also supported by Cisco Unified Communications Manager servers
E. conservation of system resources and bandwidth
F. the requirement that there always be a dedicated MOH server
Answer: CE
13 Which three determinations are possible when using the Presence feature in a Cisco Unified Communications network? (Choose three.)
Type: 2
Options:
A. Determine if an IP phone has been unplugged if the phone is in the same Cisco Unified Communications cluster as the watcher.
B. Determine if an IP phone is on hook or off hook if the phone is outside the Cisco Unified Communications cluster of the watcher.
C. Determine if an IP phone is on hook or off hook if the phone is in the same Cisco Unified Communications cluster as the watcher.
D. Determine if a set of IP phones is on hook or off hook if if the phones are in the same Cisco Unified Communications cluster as the watcher.
E. Determine if an IP phone has been moved or the user has been changed if the phone is in the same Cisco Unified Communications cluster as the watcher.
F. Determine if an IP phone has been off hook beyond a specified period of time if the phone is in the same Cisco Unified Communications cluster as the watcher.
Answer: BCD
17 What is one difference between Cisco inline power and 802.3af PoE?
Type: 1
Options:
A. Cisco inline power should only be activated for those ports that require PoE to avoid oversubscription.
B. You must determine the total number of IP phones the switch can support with 802.3af to avoid oversubscription.
C. You must specify which set of pins the powered device is going to accept power on for 802.3af.
D. Cisco inline power provides a variable amount of power by using CDP.
Answer: B
Download :642-446-pass4sure-qa-update
TestKing - TestKing.com Help you pass Cisco exams
Pass4sure -Pass4sure.com The Worldwide Renowned Cisco Certification Material Provider .
Random Posts
